Products
Biochemical Reagents
Inorganic salt
Phosphate
SKU : GC105001-500g
หมวดหมู่ : Biochemicals ,  1. Chemical and Reagents ,  Buffers ,  Servicebio , 
แบรนด์ : Servicebio
Share
Product Information
Product Name | Cat. No. | Spec. |
Sodium Phosphate Monobasic | GC105001-500g | 500 g |
Introduction
Sodium dihydrogen phosphate, also known as sodium acid phosphate, with the molecular formula NaH2PO4, is an inorganic acid salt. At a certain pH value, it is prepared by the reaction of sodium carbonate and phosphoric acid or by the reaction of disodium hydrogen phosphate and a certain proportion of phosphoric acid. It is easy to agglomerate in wet air. The density of this product is 1.40 g/cm3, melting temperature is 60 . There are three kinds of water, water and water. The anhydrous substance is white crystalline powder, slightly hygroscopic, easily soluble in water. Store tightly sealed. Sodium dihydrogen phosphate is the raw material for the manufacture of sodium hexametaphosphate and sodium pyrophosphate. It is mainly used for tanning and boiler water treatment, as quality modifier and baking powder, as raw material for buffering agent and baking powder in food industry and fermentation industry, and as feed additive, detergent and dyeing aid.
Basic Attributes
Name | Sodium Phosphate Monobasic |
Synonym | Sodium dihydrogen phosphate, monosodium phosphate |
CAS | 7558-80-7 |
Molecular formula | NaH2PO4 |
Molecular mass | 119.977 |
Purity | Analytical pure AR99% |
Appearance (character) | white powder |
Storage conditions | Room temperature |
Unit | Bottle |
Spec. | 500 g |
Pubchem CID | 23672064 |
MDL No. | MFCD00003527 |
EC No. | 231-791-2 |
Related categories | Inorganic salt, phosphate |
Solubility | 50 mg/ mL Water |
Instruction
Closed operation, local exhaust and prevent dust from being released into the workshop air. Operators must be specially trained and strictly follow the operating procedures. It is recommended that operators wear self-priming filter type dust mask, chemical safety protective glasses, protective clothing, and rubber gloves. Avoid dust. Avoid contact with acids. The leakage emergency treatment equipment should be equipped. Empty containers may retain harmful substances.
Note:
Storage precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat source. Protect from direct sunlight. The package is sealed. Should be stored separately from acids, do not mix storage. The storage area shall be equipped with suitable materials to hold the leakage.
Health hazards: This product is microtoxic and irritates eyes and skin. The heat content explains the phosphorus oxide and sodium oxide fumes.
Environmental hazard: It is harmful to the environment and can cause pollution to water bodies.
Explosion hazard: This product is non-combustible and irritant.
Skin contact: Remove contaminated clothing and rinse with plenty of running water.
Eye contact: Lift eyelid and rinse with running water or saline solution. Go to a doctor.
Inhalation: Get away from the scene to fresh air quickly. Keep your airways open. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration immediately. Go to a doctor.
Ingestion: Drink plenty of warm water to induce vomiting. Go to a doctor.
Security Information
Warning statement | P305+P351+P338 |
RTECS | WA1900000 |
WGK | 1 |
Note: The product may be optimized and upgraded. The actual label information prevails.
For Research Use Only!